lift hammer crusher everyone is familiar with the site repeatedly talked about its advantages
Crusher Machine, disadvantages, and buy, we know hammer crusher application is very extensive, the main parts of the rotor from the spindle, disk, pin and hammer composition, the motor drives the rotor at high speed in the crushing cavity. Specifically its rotor shaft and how the host of complementary interaction of it.
hammer crusher working at the time of the material from the upper feed opening into the fuselage, blow, impact, shear and abrasive high-speed movement of the hammer was crushed. Spindle as the main operative part of hammer crusher is a key part of hammer crusher, both to meet the requirements of accuracy, but also to meet the high stiffness. However, due to the installation and work spindle machining process discontinuity, the role of the spindle during rotation may be subject to an eccentric force, in particular the formation of microscopic cracks in the progressive high stress parts, if cracks gradually expanded, it would lead to a sudden Brittle fracture; there is work in the rotor, acting on the rotor assembly loads are dynamic loads, when some of the natural frequency of the frequency and structure of the force close, the spindle will have a strong resonance, causing damage or excessive deformation . Therefore, the requirements broken machine spindle to have high static and dynamic characteristics. The only way to meet the normal work hammer crusher.
hammer crusher because of its mechanism is simple, low cost, large crushing ratio, high product quality of light particles, and equipment and many other advantages, are widely used. Hammer crusher hammer wear, so hammer crusher and other crushing machine differs is that there is a need for very good hardness and wear resistance hammer, the hammer crusher is concerned
Quarry Crusher, a good Hammer is the basis for hammer crusher can work well.
